It is safe to say that everything, whether it is tools or clothes that we are talking about, is getting expensive, day by day.
A vacuum pump is one thing that you will need very often if you are someone who likes to do home projects and stuff.
Now finding a good vacuum pump at a reasonable price is almost impossible and also very time taking. Spending all your savings on an expensive tool like a vacuum pump is not very smart if you ask me.
This is why I will be teaching you how you can make your own vacuum pump with an air compressor!
In this article, I will be giving you a complete guide on how you can easily turn your air compressor into a vacuum pump in 7 easy steps, along with a small FAQ section and a conclusion at the end of the article too!
So you don’t feel like you are wasting your time or failing at this project at any given moment. Now, let’s get started on making a vacuum pump out of an air compressor!
Materials you will Need for this Project
It is always better to plan ahead so that you don’t face any kind of distractions while you are working on your project, which is why I have made you a list of things that you will need in order to make a vacuum pump out of an air compressor.
I have selected a very precise amount of products that you can easily buy at any local market, or you can also borrow from someone who you know loves doing small projects and DIYs.
Either way, you can get ahold of all of the products listed below without any difficulty. So let’s dive right into it!
- Air compressor
- Protective gloves
- Protective glasses
- A vacuum hose
- Hose bard
- PVC hose
How to Make a Vacuum Pump with an Air Compressor?
Learning how to make a vacuum pump is not as hard as it sounds, trust me! You just need to follow a few steps carefully and make sure you don’t over or underdo anything.
If you keep following the steps that I have provided you with below, you will be successful in making a vacuum pump with an air compressor in no time!
I will be teaching you how to make a vacuum pump with an air compressor in just seven easy steps! And that too all by yourself! So let’s get going!
Step by Step Guide
The following guide will help you assemble a vacuum pump with an air compressor.
Just follow these simple steps and even if you’re a beginner, you’ll end up with a piece of amazing equipment that is reliable and durable.
Step 1: Safety First
Better safe than sorry, right? Before you start this or any other project that involves stuff like air compressors, you need to make sure you are taking proper steps in protecting yourself.
So, in that way, even if you make a mistake or mess something up, it won’t affect you or any of your body parts in any way.
So, Before you go all in and start with your vacuum pump project, one thing you should do is to get ahold of your safety tools and put them on!
Your safety tools are the only thing that will protect you in case you face any mishap during the project, so don’t even think about ignoring them even once!
Step 2: Understand your Tool
Once you have done all the safety steps, it’s time to come down to the real work. We will first start with understanding your air compressor properly.
What you have to do is to read your compressors manufacturer’s instructions carefully or search them up online; this is an important step because your will be opening up your compressor, so you have to be sure that you know what you are doing.
You can also read the user’s manual for additional help and assistance. Another thing is that some air compressors are strong, and you will need more force to open them up.
Don’t panic if you can’t open them up; you just need a little more help!
Step 3: Remove the Compressor’s Cap
After you have completely understood your compressor, it is now time to open your compressor. Once you remove the cap of your compressor, you will see the pump.
Keep in mind that your focal goal here is to find the cylinder, which is mostly located under the pump. What you will need to do is to push or pull your pump to expose your cylinder.
Step 4: Attach the Vacuum Hose
Once you have successfully located your cylinder, it is now time to attach your vacuum hose to the PVC hose, but before you do that, you first need to work a little on your vacuum hose.
Take the fittings and the measurement of your vacuum hose to make everything easier. Then seal the area surrounding the intake holes and attach the bard to the epoxy.
Once you do this step, set it aside and let it dry for at least 24 hours; keep checking it every two hours or so to see if it’s drying.
Step 5: Attach PVC & Vacuum Hose
After the bard and epoxy have been attached perfectly and dried too. It is then time to bring the PVC hose into action. I would suggest you get a PVC hose that is ¼ inch thick.
Once you have the PVC hose in your hand, attach it with the vacuum hose you previously worked on, make sure you clamp both of them with the help of a barb.
You can also use a hose clamp to attach them together if you are too worried.
Otherwise, the bard will do just fine. Once you are sure that the vacuum hose and the PVC hose are attached firmly together with the barb or the hose clamp, let it sit.
Step 6: Create a Hole
You are now too close to successfully making your own vacuum pump with an air compressor. Just a few more steps, and you will be all good to go!
Now all you have to do is to work with the case; what you have to do now is to make a hose in the case so that you can easily pass your vacuum hose through the hole.
You can easily create this hole with the help of nippers in just a few minutes. Make sure you make a hole that is not too small for the vacuum hose or too big for it. (Note: Place the start of the vacuum hose on the case and do all the markings that you need and then start cutting for the hole for the perfect measurements)
Step 7: Reassemble!
Once you have successfully passed the vacuum hose through the hole you made in the case, you are all good to go!
Congratulations, you have successfully made a vacuum pump with an air compressor, all by yourself! Now you don’t even have to think about spending money on vacuum pumps anymore!
Frequently Asked Questions
Is it safe to make a vacuum pump with an air compressor?
If you do it the right way and follow all the steps carefully with full protection, then yes, it is safe to make a vacuum pump with an air compressor.
What is meant by jury-rigged?
To rig or assemble something, a tool mostly for temporary use is called jury-rigged (example: you can easily jury rig an air compressor and make it a vacuum pump)
How to remove refrigerant from car ac?
- Attach service hoses of t recovery machine to the AC’s service ports
- Locate the low-pressure service port
- Run the recovery machine
- The machine will easily remove the refrigerant
- Disconnect the machine, and you are all done!
How to convert an air compressor into a vacuum pump?
I have given you a very brief step-by-step guide on how you can convert an air compressor into a vacuum pump above. In just seven easy steps, you can convert your air compressor into a vacuum pump, so make sure you read it all!
In this article, I have taken you on a thorough step-by-step guide on how you can make a vacuum pump with an air compressor.
Along with that, I have given you guys a brief intro on what a vacuum pump is and how you don’t have to spend money on a ready-made one.
As if all this wasn’t enough, I have given you guys a small FAQ section that teaches and provides you with everything that you need to know about air compressors, vacuum pumps, and everything related to both of them that might concern you guys!
If you have any more questions or if you are still confused by anything, feel free to give this article another read! Best of luck!